Queen Creek, AZ
Home MenuCommercial/Industrial Project Submittal Requirements
Minimum Submittal Requirements
- Applicants must provide the primary contact information for the project.
- Each building will require a separate application and building permit.
Electronic Construction Plan: Electronic construction plans must be in PDF format as described in the Development Nexus. Plans can be a maximum plan size of 36” x 48”, drawn to scale. Plans may be required to be prepared by an Arizona registered design professional. Plans created by a registrant (Architect or Engineer) must contain a legible imprint of registrant’s seal and signature.
All work shall comply with the Currently Adopted Town Building Codes and other ordinances as amended by the Town of Queen Creek.
Cover Sheet: A code summary and list of design codes shall be provided, on the cover sheet.
Work Covered: Identify and describe the work to be covered by the permit for which the application is being made. This description must be on the cover sheet of the plans.
Property Description: Describe the property on which the proposed work is to be performed by legal description, street address, suite number or similar description that will readily identify and definitely locate the proposed building or work, on the cover sheet.
- Indicate the Building Code designation of the Use and Occupancy for which the proposed building is intended, on the cover sheet.
- Provide a list of deferred items and special inspections (if applicable), on the cover sheet.
- Be accompanied by construction documents and other information as required in Section 7.1.5 of the Town Building Code.
- Be submitted by the applicant, or the applicant's authorized agent.
- Give such other additional data and information as may be required by the Building Official.
- Provide an estimated construction valuation for the proposed work.
*Note: Fire sprinklers, fire alarms, and commercial kitchen hood fire suppression systems require separate Fire permits.
Plan Review Fees: Plan review fees are collected at the 1st review submittal based on the declared construction valuation. All third and subsequent submittals will require additional plan review fees.
Final Plan Review and Building Permit Fees: Fees are calculated after plan review using the square footage valuation of construction published annually by the International Code Council. Any additional plan review fees will be collected along with the building permit fee, and development fees at the time the building permit is issued.
- To request a fee estimate prior to submission, please contact a Permit Technician at 480-358-3050.
- Payments must be made by electronic funds transfer or credit/debit card through Development Nexus.
Address Requests: Follow the instructions on the Development Nexus for submitting a building permit application without a known address.
- Addressing on all permit application documents, the plans, and construction documents must consistently match the town’s assigned address.
- Building designations and suite numbers on the plans as these may change at address assignment.
- Additional Documents Required Prior to Permit Issuance.
Special Inspection Certificate: (if applicable): Submit an electronic Special Inspection Certificate with Sections A, B and C completed, including seal and signature of the Arizona registered design professional, and signed by the owner or owner/agent. Ensure that all applicable special inspections are checked on the form and that they match the special inspection items on the cover sheet.
Contractor Declaration Form: This form is required to be completed and submitted prior to the issuance of a building permit. Please ensure that the declared Contractor License classification allows the type and valuation of the proposed work.
** Courtesy Notice from Building Safety: A Town of Queen Creek Business License is required before opening for business and must be on display in a conspicuous place within the licensee's place of business. Contact the Town Clerk for additional information **